A range that has made the history of Espresso, capable of making the best espresso at home as well as in the coffee shop .

With these machines, the most compact in their category, you have technology that has been refined over time, temperature control and prestigious materials made to last.

Elegance and quality for the barista in you!

THE E61 FOR EVERYONE

Innovation

Its new dual probe system, patented by LELIT, maintains a constant extraction temperature to obtain the best result with each extraction.

Ease of use

MaraX is designed to allow everyone to extract espresso as good as at the coffee bar using an E61 group.

Silent

MaraX is extremely quiet thanks to a patent-pending system and allows a water flow designed to obtain the best result with different types of coffee and roasting, during each phase of extraction.

Machine customization

Using the MaraX you don't have to worry about the extraction temperature: thanks to the configuration switches users will be able to choose the preferred extraction temperature between normal, hot or very hot, to obtain the perfect drink.

It measures the extraction temperature

The MaraX's dual pressure gauge allows you to monitor the boiler pressure during coffee extraction. You will be able to observe the extraction curve from pre-infusion to the end of extraction.

An open tank

The new engraved and fully open tank makes filling and cleaning even easier. It is equipped with sliders to memorize the number of fillings and thus facilitate the replacement of the softener filter.

Easy to use for everyone, MaraX is the combination of simplicity and professionalism. Everyone can become a barista at home with a perfect espresso every time.

Extraction after extraction

MaraX has eliminated the waiting between extractions typical of E61 groups. This machine is always ready for the next extraction.

New stainless steel boiler

The new AISI316L stainless steel boiler is another detail aimed at improving the final result: an espresso that maintains the taste and aroma of each coffee from start to finish.

Extractions like you've never seen before

Every element of the machine contributes to creating the perfect espresso. The Lelit58 filter holder with the coffee outlets coffee slide delivers the espresso into the cup while respecting the crema. Nothing is done by chance, the inclination, the length of the coffee outlets and the open areas are carefully calibrated in order to always give the best extraction.

Satin stainless steel finish

The MaraX's design is coupled with unparalleled manufacturing quality thanks to its satin stainless steel finish, its drip tray and its cup warmer with self-cleaning grid.

Cool touch nozzles (anti-burn)

The new Lelit nozzles are all 'cool touch' to avoid burns. Their cleaning is also made easier to avoid scaling and make creating your coffees even easier.

Energy saving

MaraX is equipped with a sophisticated energy-saving system that reduces the pressure in the steam boiler after a period of inactivity of 30 minutes. The savings thus obtained are significant, avoiding wasting energy unnecessarily. The heating time of the machine once switched on is only 24 minutes.

On the MaraX V2, there are 2 operating modes:

1- Steam X mode: In this mode, the machine works as if it were equipped with 2 kettles. In fact, it guarantees the availability of steam when the extraction is finished. In this scenario, the temperature profile of the coffee extraction is less stable but becomes more precise during the infusion. The heat exchanger works more intensely in order to balance the temperature variations inside the kettle during the extraction process.

2- X coffee mode: In this mode, the machine operates as if it were equipped with a single PID-controlled kettle. The software then turns off the steam kettle while the coffee is being extracted, which on the one hand reduces the risk of overheating (a problem often associated with heat exchanger machines), and on the other hand it optimizes thermal stability. In order to recognize which mode the device is in, simply turn the machine off and then on again; if the ON/OFF switch indicator light flashes, this indicates that the X Coffee Mode is active.

The Steam Boost:

Every time the brew lever is turned on and off, the software tells the machine to turn on the heating element. This happens for 2 reasons: firstly, the element heats the cold water that has just been introduced into the kettle and secondly, the steam pressure to froth the milk increases. This therefore means that the user can simply froth milk without making a coffee extraction, to increase the steam pressure, simply raise and lower the coffee lever in order to have more than 1.2 bar of steam pressure for 120 seconds.

The dual NTC (Negative Temperature Coefficient) system:

The MaraX is equipped with 2 temperature sensors, allowing it to heat up faster as well as excellent thermal stability when producing steam and hot water. In addition, it works as a dual control system. Indeed, when one of the sensors detects a temperature fluctuation, the heating element is activated to restore the latter.

TECHNICAL DATA

• • Anti-scald nozzle Yes
  • Water tank capacity 2.5 L
  • Pump type Silent 15 bar
  • PID Yes
  • Coffee kettle capacity 1800 mL
  • Kettle Heat Exchanger
  • Coffee Kettle Materials Stainless Steel
  • Group(s) size 58 mm
  • Automatic cleaning No
  • LED water level indicator
  • Power saving / sleep mode No
  • Machine UPC 8009437002399
  • Device body Satin stainless steel
  • Total machine power 1350 watts
  • Machine voltage 120V - 60Hz
  • Weight 18.8 kg / 41.5 lb
  • Width 22 cm / 8.6 in
  • Height 35 cm / 13.8 in
  • Depth 41 cm / 16.1 in
  • Accessories included: Complete 58mm filter holder with angled handle, 1 x 9-11g filter, 1 x 14-18g filter, 1 x 18-21g filter, 1 x blind filter, 1 x 35L water filter, 1 x stainless steel tamper with red wooden handle, a brush for cleaning the group and a cleaning kit.